About IDS 2027
IDS 2027 runs from 16 to 20 March 2027 at Koelnmesse. It is the 42nd edition of the show, and Cologne has hosted it since 1992.
The show is organized by GFDI, the commercial arm of the German dental manufacturers' association (VDDI), and staged by Koelnmesse. Exhibitors range from equipment and materials manufacturers to software and service providers, and visitors come from dental practices, laboratories and the dental trade.
The stand needs to reflect what you are bringing. A treatment equipment brand may need space for units to be seen working. A laboratory supplier may need bench space to show a workflow. A software company may need screens and seating for longer conversations.
IDS 2027: Key Facts for Exhibitors
IDS 2025 had 2,010 exhibitors from 61 countries, according to the organizer. About 77 percent came from outside Germany. It also had more than 135,000 trade visitors from 156 countries, with around 55 percent from abroad, on about 180,000 sq m of gross exhibition space.
For 2027, the organizer reported that around 1,000 companies from more than 50 countries had confirmed participation soon after registration opened, with an above average rebooking rate. Exhibitor hours are 08:00 to 19:00 and visitor hours are 09:00 to 18:00. The halls listed for 2027 are 1, 2, 3, 4, 5, 10 and 11.
What to Expect at IDS 2027
IDS brings the dental industry together in one place every two years. Visitors come to see products working, compare suppliers and talk to technical teams. For the exhibitor, that means a lot of short, well informed conversations and a smaller number of longer ones.
Scale and International Reach
Based on IDS 2025, expect a large, international audience. More than half of the trade visitors came from outside Germany, and more than three quarters of the exhibitors did. A stand needs to be clear to people who may be reading it in their second or third language, which puts more weight on product display, clear graphics and demonstrations than on text.
Four Product Segments
The show is organized in four segments: dental practice, dental laboratory, infection control and maintenance, and services, information, communication and organization. Where you sit in these affects who you will meet and how long they will stay.
Digital Transformation and Sustainability
The organizer describes the 2027 show as focused on digital transformation and sustainability, with a broad product range combined with lectures and networking. [CHECK against the current official press release before publishing.]
Exhibition Stand Design for IDS 2027
Most stand problems at dental shows come from planning the look first and the function second. A stand at IDS needs to support the way your team works. Product displays need clear sightlines. Demonstrations need room for visitors to gather. Meeting areas need enough separation for focused discussions.
Start with what has to happen on the floor. A dental equipment brand may prioritize demonstration space. A laboratory supplier may need bench areas. A software company may need screens and seating. The layout should reflect your products, booked space, audience and objectives. No single stand format suits every exhibitor.
Custom Exhibition Stands
Custom exhibition stands are designed around the booked footprint, brand requirements and the activities planned for the show, not around a standard frame with your logo on it. Product displays, demonstrations and meeting areas are built into the layout from the beginning, and we build from 9 sq m inline booths to 250+ sq m island stands. In the organizer's terms, this falls under individual stands.
Modular Exhibition Stands
Modular exhibition stands give you a flexible structure if you exhibit across different spaces or events. Branded graphics, displays, meeting areas and AV can be built into the system.
Double Decker Exhibition Stands
A second level adds usable space within the same footprint. The upper floor can give you private meeting space while the ground floor handles product presentation. Koelnmesse's technical guidelines have a dedicated section on two story stands, covering construction requests, clearances, load capacity and escape routes, so approval needs to be part of the plan from the start. Whether a second level is worth it depends on your floor area and how many private meetings you need. If a single level stand would do the job, we will say so.
Country Pavilion Stands
Country pavilion stands bring several exhibitors together under a shared country or regional identity, without losing each exhibitor's space. We design the common structure and the individual company areas so each exhibitor keeps its own products and meetings while the group reads as one. The organizer describes these as group stands.
Stand Zones That Matter at IDS 2027
A practical stand gives each activity a defined place. Visitors should see the main products, understand where demonstrations happen and find your team without moving through operational areas.
Product Display Zones
Give key products clear visibility from the main visitor approach. Group related items so visitors can understand the range without searching the stand.
Demonstration Zones
Set aside floor space for equipment, instruments and materials to be shown working, with power and sightlines planned before anything decorative goes in. Leave enough room for visitors to stop without blocking the route through the stand. Giving the product room usually does more for the stand than another feature wall.
Meeting and Consultation Areas
Visitors will not enter a stand if they cannot tell where the entrance is, and open sides help. Give buyers, dealers and partners a suitable place to talk, set back from the aisle so conversations can run longer. Open tables work for quick discussions. Enclosed or semi private areas suit longer meetings, though they take up floor space you may want for demonstrations.
Storage and Operational Space
Keep samples, literature and working equipment close to the team but out of the visitor's view. Good storage planning keeps the stand orderly during busy periods.
Booth Size and Open Sides
An inline stand with one open side needs a different layout from a corner, peninsula or island. We design to the footprint you have, then show you the trade offs between demonstration space, seating, storage and graphics before anything goes into production.
Exhibition Stand Services for IDS 2027
10x10 Booths develops exhibition environments around your products, space and exhibition requirements.
Exhibition Stand Fabrication
After design approval, the stand moves into fabrication. The build covers the agreed structure, finishes, display elements and other specified components.
Installation and Dismantling
Installation and dismantling follow the venue schedule and approved requirements. The production and installation sequence is coordinated around the finished stand design.
AV and Technology
Screens, LED displays and interactive technology can support product explanations, presentations and demonstrations. Each element should have a defined role within the stand.
Planning Your IDS 2027 Stand at Koelnmesse
IDS 2027 takes place at Koelnmesse, Messeplatz 1, 50679 Köln, in the Deutz district on the right bank of the Rhine.
Venue and Hall Plan
The interactive hall plan for 2027 had not been published when this page was written. Check your hall and stand position early because location affects visitor access, visibility and how you organize the space.
Organizer Stand Types
Koelnmesse lists four stand types: system stands, modular stands, individual stands and group stands. Which suits you depends on the size of your space and how much of the design you want to control.
Build Up and Dismantling Dates
The organizer's official build up runs from 9 to 13 March 2027, and stands must be finished by 20:00 on Monday 15 March. Early build up from 6 March is available for a fee. Dismantling cannot begin before the show closes at 18:00 on Saturday 20 March. Check the latest organizer information before production, because schedules and venue requirements can change.
Discuss Your IDS 2027 Exhibition Stand
Your IDS stand starts with what needs to happen on the show floor.
Tell us about your products, booked space, demonstrations, meetings and other requirements. 10x10 Booths can then develop the stand around those needs.
What to Include in Your IDS 2027 Stand Brief
You do not need a finished concept to start. A clear brief gets you a better design and a more accurate proposal.
Stand Size, Open Sides and Hall
Tell us the booth size, how many sides are open and, once allocated, the hall and stand number. The 2027 hall plan had not been published when this page was written, so tell us if it is still pending.
Products and Demonstrations
List which products need to be shown working and which only need to be displayed. This decides how much floor area goes to demonstration versus display.
Meetings and Team
Tell us how many meetings you expect each day, how private they need to be and how many staff will be on the stand at once.








































































