Why AERO Stands Need Different Planning
AERO is Europe's largest trade show for general aviation. The 2026 edition drew 860 exhibitors from 50 countries and around 37,000 visitors from 88 countries, both records for the event. What matters more for your stand is who those visitors are.
Visitors Who Already Fly
Organizers report that over 50% of AERO visitors have a pilot's license. They ask about performance figures, avionics, certification and maintenance intervals within the first minute.
A stand built only for brand awareness loses these people quickly. Your team needs space to sit down with a visitor and go through a spec sheet without blocking the aisle.
Aircraft Share the Floor
At AERO, your product might have a wingspan. Aircraft exhibitors in the A halls and on the static display move aircraft in and out on their own schedule, and that affects when stand crews can work.
If an aircraft is part of your stand, the layout has to start with it. Meeting areas and counters work differently when a fuselage takes up half the space.
Trade and Public Together
AERO is open to trade visitors and the general public. Many public visitors are pilots, students or enthusiasts who may become buyers in a few years, but won't buy this week.
Your stand needs a way to sort visitors politely. An open front for browsing and a quieter area further back for serious sales talks usually handles this well.
Conferences Pull Visitors Away
AERO runs more than 300 conference sessions alongside the exhibition, including the AERO GA Academy, the Hydrogen & Battery Summit and the new AERO Innovation Stage. For 2027, the conference speakers’ stage moves into Hall A1. Traffic past your stand will rise and fall with the session times, so plan staffing and demonstrations around them.
What Changes in the 2027 Hall Plan
Fairnamic, the organizer, has reorganized AERO 2027 into clearer segments. If you exhibited in 2026, don't assume last year's layout still fits. Your neighbors and visitor flow may be different.
Business Aviation Gets 2.5 Days
The Business Aviation Show Hub covers Hall A1 and the Business Aviation Dome, running April 14 to 16 rather than the full 4 days. Hall A1 also hosts the first Air Charter Expo Regional Europe, run with The Air Charter Association and Business Air News.
For bizav exhibitors, that means fewer days to fill your meeting schedule. Your stand needs meeting space that works hard from the first morning.
Helicopters Move to Hall A2
Helicopters relocate to Hall A2, alongside business aviation and flight schools. Single and twin engine piston aircraft move into Halls A3 to A6.
A helicopter stand next to a flight school attracts a different crowd than one next to a piston manufacturer. Design for the hall you are actually in.
Hall A7 for New Concepts
Hall A7 is set aside for startups, hydrogen, electric propulsion and new aircraft concepts. Exhibitors here often show prototypes or models. The stand has to explain the idea clearly, because visitors can't test fly it yet.
[Request Your Concept]
AERO Friedrichshafen Stand Design
Good AERO stand design starts with what your team needs to do during the show. Finishes and lighting come after that. We plan custom stands for AERO Friedrichshafen around the conversations that lead to sales.
Plan Around the Aircraft
If you're bringing an aircraft, we plan the stand around its footprint, access points and viewing angles. Visitors want to walk around it and look inside. Your sales team needs somewhere close by to continue the conversation once that happens.
Room for Technical Conversations
Pilots stay longer than typical trade visitors. Give them a place to sit, a screen that shows the product properly and a counter where your team can work through options. Use a screen where it helps explain the product. Don't add one just because there is wall space.
Graphics That Pilots Read
This audience reads the details. Headline graphics should say what you sell in plain words, visible from the aisle. Specifications, range figures and certification details belong at eye level, where people can stop and read them.
Build Rules That Shape Your Stand
Messe Friedrichshafen and Fairnamic publish clear rules for AERO. They're easy to meet when they're part of the design from day one, and expensive to fix once the build has started.
Floor Covering in A Halls
Floor covering is mandatory for every stand in Halls A1 to A6. In the B halls and foyers it is recommended. It isn't included in the participation fee, so we include it in your design and quote from the start.
The Tuesday Vehicle Cutoff
Official set up runs April 7 to 13, 2027, with work allowed overnight into Wednesday until 9:00 a.m. From 8:00 p.m. on Tuesday, April 13, vehicles can no longer enter the halls and only internal work is allowed.
That cutoff catches teams out. Anything that needs a vehicle has to be on the stand by Tuesday evening, and we schedule the build around it.
Dismantling After the Airshow
The show closes at 4:00 p.m. on Saturday, April 17. Hall dismantling can begin from 5:00 p.m., while entry to the A halls and static display opens from 7:00 p.m. once aircraft have left. Continuous dismantling runs until 8:00 p.m. on Tuesday, April 20.
How We Work With AERO Exhibitors
Our process follows the same steps for every show we build. For AERO, the detail changes: the hall, the aircraft schedule and the rules above.
Start With a Free 3D Concept
Tell us your stand size, hall and what your team needs to achieve. We'll prepare a free 3D stand concept so you have something concrete to review before committing to a full design.
One Team on Site
Our team travels to Friedrichshafen and stays on site through build, show days and dismantling. You deal with the same people from the first brief to the last crate.
Stand Types We Build for AERO
The right stand type depends on your space, your product and whether an aircraft is part of the display.
Custom Exhibition Stands
A custom stand is designed around your brand, your stand size and what your team needs to do at the show. At AERO, that often means planning around an aircraft footprint, adding seating for technical sales talks and placing specifications where pilots can read them. Most of our AERO work starts here.
Double Deck Stands
A second level gives you private meeting space above the show floor without losing display area below. It suits business aviation and larger manufacturers with scheduled meetings across the show days. Double deck structures need extra approvals, so plan the design early.
Modular Stands
Modular systems use reusable frames and panels that can be reconfigured for different stand sizes. They suit exhibitors who attend several shows a year with a similar footprint. For a priority show like AERO, a custom build usually gives you more control over layout and finish.
Country Pavilions
A country pavilion brings several exhibitors from one nation together under a shared design. Each company gets its own space, and visitors get one clear place to find that country's aviation suppliers. We handle the shared design, the individual stand units and the coordination between exhibitors on site.
Exhibition Services for AERO Exhibitors
The stand structure is only part of the job. We handle these services alongside the build, so you deal with one contractor at Messe Friedrichshafen.
Graphics Printed and Installed
We produce large format exhibition graphics to your brand specification and print them to exhibition grade. The same team that builds your stand installs them, so panels fit properly and colors match your brand standards. If your messaging changes before next year, we can update the graphics between shows.
AV and Stand Technology
Screens, lighting and interactive displays are planned into the stand design from the first concept, so the technology explains your product instead of filling walls. At AERO, lighting often has to work for aircraft displays too. We test everything on site before the halls open.
Furniture Rentals for the Stand
We supply seating, counters, tables and storage units chosen to fit your layout. AERO visitors stay for longer technical conversations, so meeting furniture matters more here than at many shows. Everything is delivered and placed as part of the build.
Storage and Reuse Between Shows
AERO takes place every year, and organizers report that over 90% of 2026 exhibitors plan to return in 2027. We store your custom stand after the show, check its condition before each reuse and adapt it if your stand size or hall changes.
Installation and Dismantling On Site
Our own team builds and dismantles your stand at Messe Friedrichshafen, working within the official schedule. We complete final checks before opening day, then handle dismantling and clear the space after the show.








































































