How to Plan a Custom Exhibition Stand for ISH 2027 in Frankfurt
A step by step guide to planning a custom ISH 2027 exhibition stand in Frankfurt: choosing your solution field, booth type, live product demos, Messe Frankfurt approval rules, and a five day staffing plan.

Table of Contents
Introduction
ISH 2025 filled the Frankfurt fairground with 2,182 exhibitors and more than 163,000 visitors, and Messe Frankfurt expects more than 2,000 exhibitors again in 2027 (Messe Frankfurt, ISH 2027, retrieved 2026-11-02). Bathrooms, heating, pools, air handling and building software all compete for the same five days. Most of those exhibitors sell products that have to be seen working: a heat pump that runs, a shower that delivers water, a control panel a buyer can click through.
That is the planning problem. A stand that only displays product loses to the one next door that demonstrates it. This guide covers how to choose a solution field and objective, size the stand, design for live demonstration, clear Messe Frankfurt's approval process, and staff the show for five full days.
Key Takeaways
- ISH 2027 runs March 15–19, 2027, at Messe Frankfurt, under the theme "The Power of Solutions" (Messe Frankfurt).
- The show is organized into nine solution fields. Pick the one your product belongs to before you sketch a single layout.
- It is a trade audience. Build for buyers, installers, planners and specifiers, not walk-by browsing.
- Large stands, stands over 4 m tall, closed ceilings and two-storey builds can require official approval. Confirm the ISH deadline with the organizer early.
- Early-bird registration closed in December 2025, so a 2027 stand now runs on a short timeline. Start the brief immediately.
What to Know Before You Plan an ISH 2027 Stand
ISH 2027 takes place March 15 to 19, 2027, in Frankfurt am Main. The organizer groups the show into nine solution fields: Bathrooms, Pools & Spas, Water-bearing Systems, Installation, Heat Generation, Indoor Air, Intelligent Building Management, Software Solutions, and Sanitary & HVAC Production (Messe Frankfurt). The program around the floor includes conferences and talks, awards, special areas, the ISH Festival, a startup and scaleup area, and guided tours.
Four things shape the brief before design starts:
- Your solution field. It decides your neighbors, your competitors, and what buyers expect to see.
- Your objective. Launching a product, meeting existing distributors, and finding new installers need three different stands.
- Your product. What has to run, flow, heat, or light up on the stand? Shipping and utilities follow from that answer.
- Your timeline. With early-bird registration closed since December 2025 (KBB Focus), most placement decisions are already made. If your space is still open, confirm what is available before anything else.
Also Read: How to Choose an Exhibition Stand Builder for IDS Cologne 2027
Step 1: Match Your Stand to a Solution Field and One Objective
By the end of this step, you'll know which field you're exhibiting in and what the stand has to achieve.
The nine fields behave differently on the show floor. A bathroom brand is selling a finished look and feel. A building-management software company is selling a screen and a conversation. A heat-generation exhibitor is selling reliability that a buyer can't judge from a brochure. The stand follows the product.
ISH 2027 solution fields and what the stand mainly needs10x10 Booths planning view, not an organizer classification
Product shown working (utilities, water, heat) Heat Generation · Water-bearing Systems · Pools & Spas Plan connections, drainage and safety signoff before design.
Space to touch, compare and specify Bathrooms · Installation · Indoor Air · Sanitary & HVAC Production Finishes, samples and components need light and room to handle.
Screens and meeting space Intelligent Building Management · Software Solutions Demo stations and seated conversation matter more than floor area.
Solution field names: Messe Frankfurt, ISH 2027, retrieved 2026-11-02. Grouping by stand need is the 10x10 Booths planning view.
Then fix a single objective. Pick one of these and write a number next to it:
- Launch a product. Build a clear focal point and a demo that runs every hour.
- Meet distributors and key accounts. Build closed or semi-closed meeting space and book appointments before the show.
- Find new installers and specifiers. Build a demo they can handle, with technical staff on hand to answer detail questions.
Most teams spend too much time choosing finishes before deciding what the stand actually needs to achieve. Settle the objective first and the finishes become easy.
Also Read: Seven Best Exhibition Stand Builders for ICE Europe 2027 in Munich
Step 2: Choose a Booth Type and Set the Budget
Size follows what must happen on the stand at the same time. List the simultaneous activities: a running demo, two or three private meetings, a sample table. If all three have to run together, a small stand will feel crowded within the first hour.
Budget the full scope, not floor space alone:
- Stand design and build
- Graphics and lighting
- Furniture and storage
- Utility connections and any water, power or ventilation needs for working product
- Shipping, including heavy or fragile product
- Messe Frankfurt services and any required approvals
- Staffing, travel and accommodation for five show days plus build and dismantle
Floor space is often the smaller line once utilities and build are counted. Scope every line with your stand builder before anything is signed.
Step 3: Design the Stand Around Product Working
By the end of this step, you'll have a demonstration plan, not just a display plan.
Hardware needs floor space for demos. Software needs meeting rooms. Most ISH exhibitors need both.
A visitor walking the aisle decides in a few seconds whether to stop. What happens after that matters more, and it usually comes down to whether they can see the product do its job.
Build the layout around these decisions:
- Run it, don't just show it. A working shower, a pump circuit, a heating unit in operation, or a live dashboard tells a buyer more than a spec sheet. Cutaway units help where full operation isn't practical.
- Put the demo where traffic can see it. Place it on the aisle side. Keep staff beside it rather than behind a counter.
- Give samples room. Finishes, fixtures and components need good light and space to be handled and compared. Narrow shelving defeats this.
- Separate talking from browsing. A semi-closed meeting area at the back lets a distributor conversation run while the demo draws a crowd out front.
- Use screens sparingly. One well-placed screen with product in use does more than a wall of them.
- Light the product first. Graphics matter less than a lit, clean product at eye level.
Check: Imagine a Tuesday morning rush and a quiet Friday afternoon. If either scenario means moving furniture or switching off the demo, the layout isn't finished.
Also Read: OPTI 2027 Stand Construction: Key Planning Steps for Exhibitors
Step 4: Clear Messe Frankfurt's Stand Rules and Approvals
By the end of this step, you'll know which approvals your build triggers and when to submit them.
Frankfurt has formal technical rules, and they vary by hall and event. Messe Frankfurt's published stand construction regulations for another of its shows, Light Building 2026, list the kinds of builds that need official approval: ground space larger than 100 square meters, structures or goods over 4 m in height, closed ceilings, and two-storey construction. That sheet sets a submission deadline of six weeks before the start of setup (Messe Frankfurt, Light Building 2026 special stand construction regulations, retrieved 2026-11-02).
Those figures come from a different event. ISH 2027 rules and deadlines may differ, so treat them as a planning marker, not a rule for your stand. Messe Frankfurt's official height factsheets also set different limits by hall, so there is no single height number to design to. Get your hall's limits and the ISH 2027 deadlines from the organizer's technical guidelines before the design is final.
What to do:
- Ask the organizer for the hall-specific height limits and the ISH 2027 submission deadlines.
- Tell your stand builder if you want a second level, a closed ceiling, or a very large footprint. Each one adds an approval step.
- Ask whether your builder is experienced with Messe Frankfurt submissions, including structural documentation.
- Build the approval deadline back from move-in and put it on the project calendar.
A stand that is approved late is a stand that gets simplified on site. Treat the paperwork as part of the design.
Step 5: Staff Five Days and Own the Follow-Up
By the end of this step, you'll have a named rotation and a follow-up plan.
ISH is a trade audience, and buyers arrive with technical questions. Two people who can talk product detail beat six who can hand out brochures.
- Put technical people on the stand. An installer asking about connection requirements needs an answer, not a callback.
- Rotate demo duty. Whoever runs the demo repeats the same sequence for hours. Swap them out.
- Book meetings before you arrive. Distributors and key accounts plan their ISH days in advance.
- Log every conversation on the day. A badge scan tells you who stopped. It doesn't tell you what they asked for.
- Name one person for follow-up before the show opens. A lead that waits two weeks for a reply is usually gone.
Written shift schedules, by name, should exist before you fly.
Common ISH Stand Mistakes
Designing a display, not a demonstration. Visitors compare working product against static product, and the working product wins.
Treating approvals as an afterthought. A second level or closed ceiling added late can force a redesign.
Ignoring utilities. Water, drainage, power and ventilation for working product need to be planned with the organizer well ahead of move-in.
No private space. Distributor meetings held in the aisle go badly.
Technical questions with no technical person. Sales staff alone can't close an installer's question.
No follow-up owner. Leads collected over five days go cold without one person responsible for them.
Ready to Build Your ISH 2027 Stand?
ISH opens March 15, 2027. The 2027 timeline is short, so the earlier your brief is settled, the more of it survives into the final build. 10x10 Booths designs and builds custom exhibition stands for HVAC, sanitary, bathroom, pool and building-technology exhibitors, with one project manager from brief to dismantle.
Request an ISH 2027 design consultation
Frequently Asked Questions
When is ISH 2027?
ISH 2027 runs March 15–19, 2027, Monday through Friday, at Messe Frankfurt (Messe Frankfurt).
Is ISH open to the public?
ISH is a trade fair. Check the organizer's ticket and admission terms for who can enter.
What does ISH cover?
Water, heating and air. The nine solution fields run from bathrooms and pools to building management and software.
Do I need approval for a custom stand in Frankfurt?
Some builds do. Large footprints, tall structures, closed ceilings and two-storey stands have required approval at other Messe Frankfurt shows. Ask the organizer for the ISH 2027 rules.
Can I still book a space for ISH 2027?
The early-bird rate closed in December 2025. Contact the organizer to see what space remains.
Conclusion
A good ISH stand starts with the product. Choose your solution field, set one objective, build a layout that lets buyers watch the product work, and get the approval timeline settled before the design is locked. The exhibitors who do this will have a stand that holds up from the opening Monday to the Friday close.
Start your ISH 2027 planning now.

Ready to Build an Exhibition That Performs?
Whether it's a fully custom build, or a multi show programme, we're here to help you plan it. Let's start the conversation.
Whether it's a fully custom build, a pop-up system, or a multi-show programme, we're here to help you plan it. Let's start the conversation.