How to Choose an Exhibition Stand Builder for IDS Cologne 2027
Six steps to shortlist, vet and contract an exhibition stand builder for IDS Cologne (16-20 March 2027): Koelnmesse rules, quotes, timelines.

Table of Contents
Introduction
IDS 2025 filled Koelnmesse with 2,010 exhibitors from 61 countries, and the organisers counted more than 135,000 trade visitors from 156 countries. IDS 2027 runs 16-20 March 2027 (IDS Cologne). With that many competitors on the floor, your stand is the first thing a dental buyer judges, and the company that builds it decides whether it works.
This guide walks you through six steps for choosing an exhibition stand builder for IDS 2027: define your brief, shortlist builders, check Koelnmesse requirements, compare quotes, test the design, and lock the schedule. It is written for marketing and event managers at dental manufacturers, suppliers and service providers who already hold, or are about to hold, a stand at the show.
Key Takeaways
- Write a one-page brief (hall, size, demo needs, meeting space, budget) before you contact any builder. Vague briefs produce quotes you cannot compare.
- Prefer builders who can show completed Koelnmesse projects and who handle the venue's approval process, especially for two-storey stands.
- Compare quotes line by line. The cheapest total often leaves out items you will pay for later.
- Work backwards from 16 March 2027 and agree design freeze, approval submission and build dates in writing.
Before you begin
What you need:
- Your confirmed stand space, or at least the hall and approximate size you expect
- A budget range, including design, build, graphics, AV, furniture, logistics and on-site support
- Your top three show goals (for example product launch, lead capture, distributor meetings)
- Your team's product list and any heavy or sensitive equipment you will demonstrate
- Time: allow several weeks from brief to signed contract; the exact time depends on how many builders you assess
- Difficulty: Intermediate
A note on timing: IDS application forms were scheduled for spring 2026 (IDS facts and figures), so that window has passed. If you have not secured space, contact the organisers directly. Everything below assumes you have a stand or are about to receive one.
Also Read: How to Choose the Right Exhibition Stand for ISM Cologne 2027
Step 1: Write a stand brief a builder can price
By the end of this step, you will have a one-page brief that every builder receives, so their proposals answer the same question.
A builder can only design to what you tell them. A brief that says "modern, premium, 60 m²" invites 60 different interpretations.
- State the hall, stand number (or preferred location) and open sides.
- List the functions the stand must serve: product demos, closed meeting rooms, a reception counter, storage, a bar or hospitality area.
- Give a number for each function, such as how many simultaneous meetings you expect.
- Attach your brand guidelines and any existing graphics.
- State a budget range. Builders who know the range propose realistic solutions instead of padding or underselling.
- Say whether you want a custom build, a modular system, or a hybrid.
Verify: a colleague outside the project can read the brief and describe what the stand has to do.
Step 2: Shortlist builders with proven Koelnmesse experience
By the end of this step, you will have three to five builders worth requesting proposals from.
Koelnmesse has its own rules for stand construction, approvals and logistics. A builder who has done it before knows them, and a builder who has not may need extra time to learn them. The show is also highly international: at IDS 2025, 1,547 of 2,010 exhibitors (77%) came from outside Germany (Dental Tribune).
IDS 2025 exhibitors by origin Horizontal bars: 1,547 foreign exhibitors (77 percent) and 463 German exhibitors (23 percent) out of 2,010. IDS 2025 exhibitors by origin (2,010 total) Foreign 1,547 (77%) German 463 (23%) Source: Koelnmesse press release on IDS 2025
Source: Koelnmesse press release on IDS 2025; Dental Tribune, 2025.
Also Read: How to Choose a Gulfood 2027 Exhibition Stand Builder
Ask each candidate for:
- Two or three completed stands in Koelnmesse halls, with the show name and year
- A reference you can call, ideally a dental or medical-technology exhibitor
- The names and roles of the people who will manage your project, not just the sales contact
- Whether they design, manufacture and install in-house or subcontract those stages
- Evidence of insurance and how they handle on-site problems during show days
Pay attention to language and time zone too. If your team is outside Germany, confirm who answers the phone during build week and in which language.
Verify: every shortlisted builder has given you references you can actually contact.
Step 3: Check Koelnmesse requirements before you fall in love with a design
By the end of this step, you will know which parts of your concept need venue approval and what that does to your schedule.
Koelnmesse publishes Technical Guidelines for exhibitors and stand constructors. The July 2024 edition includes a chapter on two-storey construction covering the construction request, clearance and interior height, load capacity, escape routes and stairs, materials and the upper floor (Koelnmesse Technical Guidelines, July 2024 edition, hosted by a third-party organiser, so check the current edition on the IDS exhibitor portal).
Exhibitor guidance for another Koelnmesse fair, interzum, says two-storey stands need Koelnmesse acceptance, particularly with meeting areas or static calculations. It says plans must be submitted at least six weeks before construction starts, through the Koelnmesse platform Delegatis, and that structures or advertising in passages and boulevards may not exceed 3.00 m (interzum compact information for stand constructors). These figures come from a different show, so confirm the IDS-specific deadlines with the organisers.
What to do:
- Download the current Technical Guidelines and the IDS-specific exhibitor documents.
- Ask each builder how they handle approvals and who submits the documents.
- Flag any design element that is a likely approval item: a second floor, hanging rigging, heavy equipment, enclosed rooms.
- Ask each builder to name the guideline sections their design relies on.
Verify: each builder can tell you, in writing, which elements of their proposal need approval and by when.
Also Read: How to Choose an Exhibition Stand Builder for DSEI Germany 2027
Step 4: Compare proposals line by line
By the end of this step, you will have a comparison table that shows what each quote includes, so price differences mean something.
Ask every builder to use the same structure, or rebuild their numbers into yours. A simple comparison covers:
Watch for these gaps:
- Exclusions in small print. Ask whether electrics, rigging, cleaning and venue service fees are included or billed separately.
- Per-revision charges. Ask how many design rounds are included.
- Reuse. If you attend more shows, ask whether components can be stored and reused, and what that costs.
Verify: you can explain the price gap between the highest and lowest quote in terms of scope, not just cost.
Step 5: Judge the design and engineering, not just the render
By the end of this step, you will know which builder's concept best serves your visitors and your team.
A good render sells a concept. A good stand works through five show days of 8:00 to 19:00 (IDS opening hours). Dental stands have specific demands, because visitors want to handle devices, see digital workflows and sit down for detailed conversations.
Questions to put to each builder:
- How does a visitor find the product they came for from the aisle in the first five seconds?
- Where do demos happen, and how do they avoid blocking the walkway or each other?
- What is the plan for closed meetings, and how well do those rooms keep sound in?
- How is equipment loaded, powered and secured? Do heavy items need reinforced flooring?
- Where do staff store coats, samples and literature so the stand stays clean?
- What happens if a product arrives late or a screen fails on day one?
Ask for a walkthrough of the floor plan with traffic flow marked, not only the hero image.
Verify: you can trace a visitor's route through the stand and a staff member's route behind it without conflicts.
Also Read: How to Choose a Stand Builder for R+T Stuttgart 2027
Step 6: Lock the schedule, responsibilities and support
By the end of this step, you will have a contract with dates, deliverables and named owners.
Work backwards from the opening day, 16 March 2027, and put each milestone in the contract:
- Design freeze date
- Submission date for any approval documents
- Graphics artwork deadline
- Production start and completion
- Transport and arrival at the venue
- Build period and sign-off
- On-site supervision during the show
- Dismantling and return of materials
Define who owns each item: you, the builder or the venue's services. Agree how changes after design freeze are priced. Add a handover checklist so you inspect the stand together before the doors open.
Verify: every milestone has a date and a named person on both sides.
Common mistakes to avoid
1. Choosing on price alone. A low quote often reflects a narrower scope. Compare scope first, then price.
2. Starting late. Design, approval, production and logistics all take time, and approval items can fix your deadline. Begin the brief as soon as you hold your space.
3. Treating the render as the deliverable. The render is a promise. The drawings, materials list and approval documents are what get built.
4. Skipping the guideline check. Finding out in the final weeks that a second floor or hanging structure needs approval can force a redesign. Check Step 3 before design sign-off.
5. No on-site plan. Problems appear on build days and show days. Confirm who is physically present and how to reach them.
What success looks like
If the process went well, you hold a signed contract with a fixed scope, a list of approved or submitted documents, a dated production schedule and a named on-site contact. Your team knows where each demo, meeting and storage function sits on the stand.
As a stretch goal, ask your builder to plan the stand so parts can be reused or reconfigured for your next show, which lets you spread the build cost over more than one show.
Also Read: Anuga FoodTec 2027 Exhibitor Guide
Frequently asked questions
How early should I start looking for a builder?
As early as you can once your stand space is confirmed. Approval items, production and logistics all take time. Ask each builder for the latest date they would accept a brief for IDS.
Should I choose a custom or modular stand?
Custom builds fit unusual layouts, strong brand identity and demo-heavy concepts. Modular systems suit teams that attend many shows and want reuse. A hybrid, with a modular structure and custom feature areas, is common.
Can a builder from outside Germany work at Koelnmesse?
Ask the IDS organisers which rules apply to your builder, including any registration requirements for stand constructors, and check the Technical Guidelines. Then ask the builder whether they have worked in Koelnmesse halls before and who manages approvals and logistics locally.
What do I do if I haven't received my stand allocation?
Contact the IDS organisers directly and ask whether space is still available and when your stand location will be confirmed. Application forms were scheduled for spring 2026 (IDS facts and figures), so availability may be limited.
Conclusion
Choosing a stand builder for IDS 2027 comes down to six decisions: a clear brief, a shortlist with real Koelnmesse experience, early attention to approvals, like-for-like quotes, a design that works for visitors, and a contract with dated milestones. Do these in order and the build becomes a managed project rather than a last-minute scramble.

Ready to Build an Exhibition That Performs?
Whether it's a fully custom build, or a multi show programme, we're here to help you plan it. Let's start the conversation.
Whether it's a fully custom build, a pop-up system, or a multi-show programme, we're here to help you plan it. Let's start the conversation.