Custom Exhibition Stand Design for Wine & Spirits Brands at ProWein 2027
ProWein 2027 runs March 7 to 9 at Messe Düsseldorf, and visitors come to taste, compare and decide. This guide covers how to plan a stand that works as a tasting room and a meeting room, how open sides and the spirits move to Hall 6 change the layout, and what to send 10x10 Booths first.

Table of Contents
Introduction
ProWein 2027 runs March 7 to 9 at Messe Düsseldorf. For wine and spirits brands, the stand brief is different from most trade shows, because visitors come to taste, compare and decide. Custom exhibition stand design here has to work as a tasting room and a meeting room before it works as a billboard.
The last edition made that clearer. Attendance fell, and the buyers who did come were there to do business. A stand built to catch crowds will struggle in that setting. A stand built for a proper conversation at a table won't.
Key Takeaways
- ProWein 2026 closed with 3,400 exhibitors and 31,000 trade visitors, down from
- 4,200 and 42,000 a year earlier. Build the stand around booked appointments, not aisle traffic.
- Buyers taste, compare and decide. Plan the pouring zone and the meeting zone before the back wall and branding.
- The whole spirits section moves into Hall 6 for 2027, so your neighbors are direct competitors. Give buyers one bottle presentation or one serve they will remember.
- Open sides decide the layout. An inline stand puts pouring at the front and meetings at the back, while a corner, peninsula or island stand can separate the two.
- Messe Düsseldorf’s Technical Guidelines, valid from January 1, 2026, set what you can build. Read them before you lock the design, not after.
What the 2026 numbers say
ProWein 2026 closed with 3,400 exhibitors from 63 countries and 31,000 trade visitors from 105 countries, according to the organizer. A year earlier the fair counted 42,000 visitors and 4,200 exhibitors, so both figures dropped. The Spirits Business put the visitor decline at 26%.
Fewer people sounds like bad news for a stand, but it depends on what you were counting on. If your plan relied on heavy aisle traffic, it is. If it relied on appointments, much less so.
The organizer reports 72,488 business contacts started before and during the fair, and calls the ProWein App with its Fair Match tool a key part of that.
Not everyone reads the headline figures the same way. The editor-in-chief of Meininger's International wrote that the statistics tell very little, and quoted an exhibitor who said the quality of a trade fair "isn't decided at the turnstile". That's a fair point. You can't control the turnstile. You can control what happens at your table once a buyer arrives.
When buyers book meetings ahead, the stand has to hold them. That means seats that are free when the appointment starts, a table that isn't also the tasting counter, and somewhere to keep the next buyer's samples out of sight.
Also Read: Gulfood 2027 Exhibition Stand Builders: What to Ask Before You Hire
Plan the tasting before the branding
Most teams spend too much time on the back wall and not enough on where the pouring happens. It should be the other way round.
Start by separating two activities that usually get squeezed together. The pouring zone is busy, a little noisy and open to the aisle. The meeting zone is where someone discusses volumes and delivery terms with your sales director. A buyer in that conversation shouldn't be elbow to elbow with a queue at the bar.
On a small stand you may only manage a few meters between the two, but a low partition or a change in flooring and lighting helps.
Then think about the unglamorous parts. Where do glasses get washed and stored? Where does unopened stock live, and can it be locked? You order technical services through the organizer's Online Order System, so settle the layout early enough to know where the connections have to land.
A beautiful counter with nowhere to put a case of bottles turns into a cluttered counter by the second morning.
Display comes next, and it's simpler than it looks. Light the shelf so visitors can read labels from the aisle. If they can't, that bottle is in storage, not on display. Wine labels and spirits bottles behave differently under light, so test your actual products against the lighting plan rather than a generic render.
A screen should earn its place. Use it where it explains something that bottles can't, like how a distillery works or where a vineyard sits. Don't add one because the wall has space.
Also Read: Exhibition Stand Builder for INTERNORGA 2027: Custom Booth Design in Hamburg
Spirits and wine need different stands
For 2027, ProWein has moved the whole spirits section into Hall 6. In 2026 ProSpirits took two halls and around 500 exhibitors from 50 countries, so putting everything under one roof means your neighbors are direct competitors. The stand has to be recognizable from a distance and still make sense up close.
For spirits, that usually points to a bar front, a lit back bar and one clear idea about how the product gets served, whether that's neat, over ice or in a single signature cocktail. Spirits buyers compare many brands in a short walk. Give them one bottle presentation or one serve they will remember, not ten.
Wine producers often have a different problem. Ahead of 2026, Decanter reported that Portugal and Spain would each present united regional stand concepts in their halls. If you share a pavilion, your design freedom sits inside someone else's frame, and the work is making your corner clear and well organized. If you exhibit on your own, your stand has to hold its own next to those collective presentations.
Whichever applies, check the hall plan when the organizer publishes it. A stand beside a main walkway behaves differently from one at the end of a row, so don't force one design onto both.
How open sides change the layout
An inline stand has one open side, so everything faces the aisle. The pouring zone has to sit at the front and meetings get pushed to the back. A corner stand gives you two open sides, which is often enough to split the two activities without building a wall between them.
Peninsula and island stands have 3 and 4 open sides. You can put the tasting bar on one face and the meeting area on another. The trade-off is that the back of house, with its stock and storage, is visible from several angles, so it needs to look as tidy as the front.
Also Read: How to Choose an Exhibition Stand Builder for IDS Cologne 2027
Check the rules before you draw
Messe Düsseldorf's Technical Guidelines, valid from January 1, 2026, include sections on stand construction inspection and construction heights. Read them before you lock the design, not after.
As a reference point, the organizer's notice for ProWein 2023 set a maximum stand height of 6 meters. Messe Düsseldorf's technical department approved hanging elements above the stand at its own discretion. Rules can change between editions, so confirm the 2027 position with the organizer.
A tall sign or a suspended ceiling is never automatic. If a design ignores the height limit, someone redraws it late, and late is when time is shortest.
Modular, custom, or a mix
Custom doesn't have to mean starting from zero every time. If you exhibit at more than one fair a year, think about what comes back. 10x10 Booths builds modular and reusable stand systems and stores stands between shows, so a core structure can return with new graphics and a reworked counter layout.
Fully custom makes sense when the brief needs a shape or a tasting arrangement a system can't give you. The right answer depends on your objectives, your stand size and how many shows the stand has to serve. We'd rather work that out with you before drawing anything.
What to send first
Before any renderings, write down 4 things: your hall and stand number once the organizer allocates it, the stand size and how many sides are open, how many meetings you expect each day, and what you'll be pouring. With those, 10x10 Booths can prepare a free 3D stand concept. The team travels to the show and stays on site, so the person who designed the stand is nearby when something needs adjusting.
Questions Exhibitors Often Ask
When and where is ProWein 2027?
ProWein 2027 runs March 7 to 9, 2027 at Messe Düsseldorf in Düsseldorf, Germany. It's a 3 day fair for the wine and spirits trade.
Who visits ProWein?
It's a trade only fair. The organizer describes the audience as producers, retailers, importers, sommeliers and other decision makers from the industry, so design for business conversations rather than general public tastings.
Where will spirits brands exhibit in 2027?
The organizer has moved the whole spirits section, ProSpirits, into Hall 6 for 2027. Your own hall and stand number come from the organizer once your application is approved, so wait for that before you lock a layout. Check the hall plan to see what sits around you.
Should we choose a modular or a custom stand?
It depends on your objectives, your stand size and how many shows the stand has to serve. A modular core with custom graphics and a custom counter suits brands that exhibit often. A fully custom build suits a brief a system can't meet, like a specific tasting layout.
Can a small stand still work at ProWein?
Yes, if the layout is honest about what the space has to do. Keep the pouring area and the meeting area apart, even by a few meters, and store stock inside the structure. A small stand that does two jobs clearly beats a large one that does four badly.

Ready to Build an Exhibition That Performs?
Whether it's a fully custom build, or a multi show programme, we're here to help you plan it. Let's start the conversation.
Whether it's a fully custom build, a pop-up system, or a multi-show programme, we're here to help you plan it. Let's start the conversation.