How to Choose the Best Exhibition Stand Builder for ITB Berlin 2027
ITB Berlin 2027 moves exhibitors from Halls 7.1c, 8.1, 9 and 10.1 into CityCube Berlin, so hall limits and approvals need checking before anyone draws a render. This guide covers how to judge a stand builder on Messe Berlin’s rules, what to ask about build days and quotes, and what to send 10x10 Booths first.

Table of Contents
Introduction
For ITB Berlin 2027, exhibitors from Halls 7.1c, 8.1, 9 and 10.1 are moving into CityCube Berlin, which will work as an exhibition hall for the first time. A different venue means limits and approvals worth checking before anyone draws a render.
That is why the exhibition stand builder you choose for ITB Berlin 2027 matters more than the portfolio they show you. Hire the team that already knows Messe Berlin's paperwork and hall limits and can show you how it handles them.
Key Takeaways
- Exhibitors from Halls 7.1c, 8.1, 9 and 10.1 are moving into CityCube Berlin for 2027, so old drawings and height limits may not carry over.
- Choose a builder on the rules before the portfolio. Ask who submits approval documents to Messe Berlin and by what date.
- Single level stands built to the technical guidelines need no approval drawings. Upper levels and mobile stands do, each with a structural analysis, and the deadlines were January 15 in 2025 and 2026.
- Height limits depend on the hall. Confirm yours with Messe Berlin’s technical department before the design is drawn.
- Construction runs March 9 to 15 and dismantling March 19 to 22. Ask each builder for a day by day build plan and the date structural work ends.
Rules first, portfolio second
Generic checklists tell you to check experience and local knowledge. That advice would fit any show in any city. ITB Berlin has specifics, and that's where stands run into trouble.
Take approvals. According to ITB's 2025 exhibitor information, single level stands built to the technical guidelines don't need drawings submitted for approval. Everything else does, including upper levels and mobile stands, and each one needs a structural analysis as proof of stability. For that show, full documents were due by January 15, and later submissions meant the permit could not be guaranteed.
So an open single level stand carries little approval risk, and you shouldn't weigh it heavily when comparing builders. A double decker changes that completely.
Heights depend on the hall. In 2025 the general limit was 5 m for stands up to 50 m² and 6 m for stands between 50 and 200 m². Halls 8.1 and 10.1 had a binding cap of 3.60 m, and halls 1.1 to 6.1 were held to 5.50 m, sometimes 5 m or 3.50 m. Nobody enjoys a gorgeous render of a stand that can't be built at that height.
Treat those numbers as a sample of what to ask, because the 2027 limits may differ. What matters is whether your builder knows where to look up your hall's limit and who confirms it with the technical department at Messe Berlin.
Also Read: Exhibition Stand Builder for INTERNORGA 2027: Custom Booth Design in Hamburg
What the CityCube move changes
ITB announced the new hall layout in July 2026. Hall 9 is being demolished from October 2026 to make room for a new venue called dock9, and ITB says CityCube suits larger, technically advanced stands.
A few things follow. If you exhibited in one of the affected halls, your old drawings may not carry over, and that includes height limits. Halls 8.1 and 10.1 had a 3.60 m cap in 2025. ITB also said final stand space assignments would finish later in 2026, so some exhibitors may not have a confirmed position yet.
So ask each builder how the quote handles a change of hall or stand position and whether design work is billed in stages. A flat "no problem" from someone who hasn't seen the new hall rules is a warning sign.
How early is early enough
ITB's registration deadline for 2027 was September 1, 2026 (ITB stand registration), and build starts on March 9, 2027. Everything in between, from concept to approved drawings, has to fit into those months, and final stand assignments were still being settled when ITB published its hall changes.
My view: don't wait for your final hall position to start the brief. The concept and the builder shortlist don't depend on it. Only the final drawings do.
Build days leave little slack
ITB lists construction for March 9 to 15, 7 am to 10 pm, and dismantling for March 19 to 22. A build and dismantling pass is also valid from 7 pm to 10 pm on March 18. Vehicles enter only with a booked loading zone slot. Roadworks at the Funkturm motorway junction changed the route for heavy goods vehicles from the A115, so ITB tells exhibitors to allow extra travel time (ITB access information).
The 2026 rules add a catch. Night construction was not allowed, and on the last build day only decorative work was permitted, from 10 am (ITB exhibitor newsletter, January 2026). ITB also asked builders to clear the hall aisles by 3 pm that day (ITB stand construction page). If 2027 repeats that, a stand that needs the last day for structural work is in trouble.
Ask each builder for a day by day build plan with crew numbers and the date structural work ends. That answer tells you more than a reference list.
What a quote should cover
ITB's stand rental covers floor space only, with no stand construction. So a builder's quote should say what it includes: design, construction, graphics, furniture, power, installation, dismantling and approval documents. Insurance isn't part of ITB's stand rental either, so ask who covers it. When two quotes differ, compare scope before you compare anything else.
Also Read: How to Choose an Exhibition Stand Builder for IDS Cologne 2027
Ask your ITB Berlin stand builder
Put these to every shortlisted builder and ask for the answers in writing:
- Who submits approval documents to Messe Berlin, and by what date?
- Which height limit applies in my hall, and where did you get it?
- Which items sit outside your quote, such as power and insurance?
- What day does structural work finish, and how many people are on site each day?
- What happens to the design and the quote if my hall or position changes?
- Who is on the stand during the show if something breaks?
If your stand has an upper level, put one date in the calendar first. ITB set January 15 for approval documents in both 2025 and 2026. The 2027 show opens 13 days later in March than the 2026 one, so confirm the new date in the Exhibitor Portal before you rely on it.
Talk to 10x10 Booths
If you're exhibiting at ITB Berlin 2027, send 10x10 Booths your booth size, your hall or stand number if you have it, and what the stand needs to achieve. We'll come back with a free 3D stand concept, and our team is on site at the shows. If a modular stand that can be reused after Berlin fits your plans, say so in your brief.
Frequently Asked Questions
When does build and dismantling run for ITB Berlin 2027?
ITB lists construction for March 9 to 15, 7 am to 10 pm, and dismantling for March 19 to 22. Night construction wasn’t allowed in 2026, and the last build day allowed only decorative work. Ask your builder to confirm the 2027 rules in writing.
Does my stand need approval from Messe Berlin?
Single level stands built to the technical guidelines don’t need drawings submitted. Upper levels and mobile stands do, each with a structural analysis. ITB set January 15 as the deadline in both 2025 and 2026, so confirm the 2027 date in the Exhibitor Portal.
What is the stand height limit at ITB Berlin?
It depends on your hall. In 2025 the general limit was 5 m for stands up to 50 m² and 6 m for stands from 50 to 200 m². Halls 8.1 and 10.1 had a 3.60 m cap. The 2027 limits may differ, so ask Messe Berlin’s technical department.
What does ITB’s stand rental include?
Floor space only. It doesn’t cover stand construction or insurance. A builder’s quote should say whether it includes design, construction, graphics, furniture, power, installation, dismantling and approval documents. When two quotes differ, compare what each one covers before you compare anything else.
When should I brief a stand builder?
Don’t wait for your final hall position. ITB’s registration deadline was September 1, 2026, and final stand assignments were still being settled when the hall changes were announced. The concept and the builder shortlist don’t depend on your position. Only the final drawings do.
Related Reading: Seven Best Exhibition Stand Builders for ICE Europe 2027 in Munich

Ready to Build an Exhibition That Performs?
Whether it's a fully custom build, or a multi show programme, we're here to help you plan it. Let's start the conversation.
Whether it's a fully custom build, a pop-up system, or a multi-show programme, we're here to help you plan it. Let's start the conversation.